Pounds Floor & Tile
8732 North Lamar
Austin, Texas 78753
Telephone: 512-836-6990 Toll Free: 877-836-6991

 

 

 

 


   

Aqua Mix Clean 'N Seal Kit
SKU: 3C-AQX.C&SKIT

Aqua Mix Clean 'N Seal Kit

Aqua Mix Clean 'N Seal Kit is an easy-to-use all-in-one kit designed to clean and protect dirty and neglected grout. Kit contains 8-oz. spray Grout Deep Clean and 8-oz. spray Grout Sealer. Ideal for tiled countertops and showers.

Grout Deep Clean

  • Aqua Mix Grout Deep Clean is a powerful cleaner designed to remove grease, food stains, soap scum, hard water deposits, dirt and soil from grout joints. Restores color and appearance of dirty and stained grout.
  • Prepares grout joints for sealing with Aqua Mix Grout Sealer.
  • Recommended for use on cementitious sanded or unsanded grout joints, surrounding tile and stone.
  • Coverage: One 8-oz bottle will clean approximately 25 to 75 sq. ft. of tiles area.
  • Spray onto grout joint and allow to dwell for 5 to 10 minutes. Agitate with scrub brush or white scrub pad. Rinse thoroughly with clean water. Repeat if necessary. Allow 2 hours drying time before sealing.

Grout Sealer

  • Aqua Mix Grout Sealer is a water-based sealer that resists water, oil and acid-based contaminants. It simplifies maintenance and does not change the appearance of the grout. Allows moisture vapor transmission. The expected wear is up to 5 years.
  • Use on cementitious sanded and unsanded grout joints for ceramic tile installations. Equally effective for interior and exterior applications.
  • Coverage: One 8-oz bottle will clean approximately 25 to 75 sq. ft. of tiles area.
  • Grout joints must be clean and free of existing sealers and coatings. Spray 1 to 2 coat directly onto grout joints. Using cotton paper towels, polish dry any sealer remaining on tile and grout within 3 to 5 minutes after each application of each coat.
  • If 2 coats are applied, allow a minimum 30 minutes drying time between coats. After 2 hours, conduct a test to determine if surface is completely sealed by applying water droplets to the surface. If water is absorbed, apply an additional coat. Wait 2 hours and repeat the test.
  • Ready for surface traffic 2 hours after final coat. Sealed area should be kept dry for 12 hours. Achieves a full cure after 24 hours.
Aqua Mix


$14.95 Kit

Quantity 

Size  

You may be interested in these items 

E-mail a friend about this item.

Return to Catalog

 


2002 Pounds Floor & Tile, All rights reserved. Privacy Statement | Customer Service Policy